EVIT designs, builds and supports the hardware behind electric mobility in India. Pick a service to see everything it includes.
- 01
Chargers
AC chargers from 3.3 kW to 44 kW and DC fast chargers up to 120 kW for e-2W, e-3W and e-4W.
View details - 02
Controllers
Controller boards and component kits that other manufacturers build their chargers on.
View details - 03
Swapping Stations
Battery swapping stations that turn an e-2W or e-3W battery change into a stop of a few minutes.
View details - 04
R&D & Designs
Engineering to your brief: power electronics, firmware, PCB and enclosure design, from prototype to production.
View details
Chargers for every vehicle and every site.
Thirteen charger models designed and built in India: single-socket home chargers, multi-socket units for e-rickshaw hubs, Type 2 wallboxes for societies and offices, and CCS fast chargers for highways and fleets. Every model talks OCPP, so it works with our CMS or any compliant backend.
AC chargers, 3.3 – 44 kW
AC001 and Type 2 chargers with touch HMI, LED status light and a built-in energy meter.
DC fast chargers, 15 – 120 kW
DC001 and CCS fast chargers with fan cooling for public, highway and fleet charging.
Connected out of the box
OCPP 1.6J (upgradable to 2.0) over Ethernet, Wi-Fi or 4G, with RFID, QR code and app sign-in.
Built for Indian sites
IP55 and IK10 enclosures rated from −30 °C to 55 °C, with battery backup for the controls.
- Chargers deployed
- 5,000+
- Chargers deployed
- States covered
- 20+
- States covered
- Compliant, NABL tested
- AIS-138
- Compliant, NABL tested
EVIT supplied the chargers for EESL’s electric car fleet at the Ministry of Power in 2017, and BECIL ordered 2,100 chargers in a single order in 2022.
The electronics inside the charger.
The boards we design for our own chargers are also available to other manufacturers. We supply proven controller boards and complete component kits, or design a controller to your specification, and you ship the charger under your own brand.
Main controller boards
Charging logic, safety interlocks and OCPP communication for AC and DC chargers.
Communication boards
Ethernet, Wi-Fi and 4G connectivity modules that connect a charger to a CMS.
Metering and HMI boards
Per-output energy metering, touch-display and RFID interfaces.
Complete EVSE kits
Every board a charger needs in one tested kit, ready to assemble in your enclosure.
- Component kits supplied
- 3,000+
- Component kits supplied
- Controller platforms
- AC + DC
- Controller platforms
- Upgradable to 2.0
- OCPP 1.6J
- Upgradable to 2.0
EVIT designed a DC CCS charger controller for BHEL R&D, and has supplied more than 3,000 component kits to charger manufacturers across India.
Swap the battery, skip the wait.
For fleets that cannot wait for a charge, we design and build battery swapping stations. A rider drops off a depleted battery and leaves with a charged one while the station charges and monitors every battery in its docks.
Station design and build
Cabinet, battery docks and charging electronics designed around your battery pack.
Per-slot charging and monitoring
Each dock charges its own battery and reports charge level, temperature and faults.
Fleet and operator software
Swap records, battery tracking and station status connected to your backend.
Deployment and service
Site setup, installation, commissioning and after-sales support from one team.
- First station, for Murata
- 2018
- First station, for Murata
- Vehicle focus
- e-2W + e-3W
- Vehicle focus
- Manufacturing partner
- Napino
- Manufacturing partner
EVIT built a battery swapping station for Murata, Japan in 2018, and developed its swapping solution with the R&D teams of Micromax and Napino.
Your idea, engineered at IIT Delhi.
Our R&D team takes on engineering work for companies, research labs and public bodies. We design the electronics, write the firmware, build and test the prototype, and hand over a design that is ready to manufacture.
Power electronics
On-board chargers, DC power stages and high-power systems for electric vehicles.
Embedded firmware and software
Charger firmware, OCPP stacks, payment flows and fleet management software.
PCB and product design
Schematics, board layout, enclosure and wiring designed for manufacture.
Prototyping and testing
Working prototypes, validated in our lab before they go to volume production.
- Research & Innovation Park
- IIT Delhi
- Research & Innovation Park
- High-power partner
- ST Micro
- High-power partner
- On-board chargers built
- 1.2 kW
- On-board chargers built
Projects include high-power systems with ST Microelectronics, battery technology with Murata, 1.2 kW on-board chargers for e-2W and e-3W, and our own OCPP charger management system.
One team, from first sketch to after-sales support.
Whichever service you need, the same engineers design, test, build and support it, so nothing is lost between hand-offs.
- 1
Brief
We learn your vehicles, sites and volumes, and agree what success looks like.
- 2
Design
Electronics, firmware and enclosure designed in-house at IIT Delhi.
- 3
Prototype & test
Working units validated in our lab against IEC and Bharat standards.
- 4
Manufacture
Volume production with Napino Auto & Electronics, inspected lot by lot.
- 5
Deploy & support
Installation, commissioning and after-sales service across India.
Not sure which service fits?
Tell us what you are building, and our engineering team will suggest the right place to start.