Controller boards, communication cards and complete component kits, designed by our engineers at IIT Delhi. They run our own chargers, and charger makers across India build on them.
- Component kits supplied
- 3,000+
- Component kits supplied
- Controller platforms
- AC + DC
- Controller platforms
- Upgradable to 2.0
- OCPP 1.6J
- Upgradable to 2.0
Every board a charger needs.
Buy a single board type or the complete set. Every board is the same design we ship in our own chargers.
Main controller boards
The brain of the charger: charging sequence, safety interlocks and communication with the backend.
- AC and DC charger platforms
- OCPP 1.6J, upgradable to 2.0.1
- Architecture ready for ISO 15118 and V2G
Communication boards
Network cards that connect a charger to its charger management system.
- Ethernet, Wi-Fi and 4G
- Remote monitoring through the CMS
- Works with any OCPP backend
Metering and HMI boards
Energy measurement and the user interface the driver touches.
- Class 1.0 energy metering per output
- Touch displays from 4.3" to 7"
- RFID, QR code and app sign-in
Complete EVSE kits
Every board a charger needs, tested together and ready to assemble in your enclosure.
- Matched, pre-tested set of boards
- Wiring and integration guidance
- Supplied in volume for production
See where each part sits.
Hover or tap a number to explore an EVIT AC charger with its door open.
1Main controller boardDesigned by EVIT
Runs the charging logic and safety interlocks, and talks OCPP to the charger management system.
The controller watches for faults all the time.
Our controllers monitor the supply and the vehicle connection during every session, and shut the charger down safely when something goes wrong.
Pick the level of help you need.
Proven kits, off the shelf
The same boards that run our own chargers. The quickest route to a charger of your own.
A controller designed for you
We design to your specification, as we did with the DC CCS charger controller for BHEL R&D.
White-label chargers
Prefer not to assemble? We supply the finished charger under your brand.
From requirement to production boards.
- 1
Requirements
Power level, connector, communication and certification targets.
- 2
Design or adapt
We adapt a proven board or design a new one at IIT Delhi.
- 3
Prototype and validate
Working samples tested in our lab against IEC and IS standards.
- 4
Volume supply
Production with Napino Auto & Electronics, our manufacturing partner.
- 5
Integration support
Help bringing the boards up in your charger and backend.
EVIT designed a DC CCS charger controller for BHEL R&D, and has supplied more than 3,000 EVSE component kits to charger manufacturers across India.
Frequently asked questions
Which chargers can your controllers run?
We have controller platforms for both AC and DC chargers, from single-socket AC units to CCS fast chargers. They run every model in our own 13-charger range.
Do the controllers support OCPP?
Yes. They run OCPP 1.6J, upgradable to 2.0.1, and the architecture is ready for ISO 15118 and vehicle-to-grid (V2G). They connect to our CMS or any OCPP-compliant backend.
Can you design a controller to our specification?
Yes. Custom design is a core part of what we do. For example, we designed a DC CCS charger controller for BHEL R&D.
Can you supply in production volumes?
Yes. Boards are manufactured with Napino Auto & Electronics, and we have supplied more than 3,000 EVSE component kits to other manufacturers.
Other EVIT services
Building a charger? Start with proven electronics.
Tell us what you are building, and our engineers will suggest the right boards or a custom design.